Price: $99.99 - $53.94
(as of Jan 24, 2025 13:51:44 UTC – Details)
Noise (important): There will be load noise when working with rough tires. Quite when working with road bike tires
Works on any surface: Simulates real cycling feel, rubber feet will prevent scratching wood floor. Built with a wide base and low stance for unshakable balance. Max load 330 lbs.
Easy to install and release: Install process is easy. Quick release clamp helps clamps your rear wheel tightly. It also helps to take the bike down much easier than other bike trainers
8 resistance settings: 8 levels, magnetic resistances meet your specific needs about resistance & speed; handle bar mounted resistance controller easily lets you adjust resistance
Wide compatibility: Balance from bike, trainer stand Fits any road or mountain bike with a 26-28″ or 700C wheel
Customers say
Customers find the bicycle trainer easy to assemble and stable. It works well for indoor training and provides good value for money. While some customers are satisfied with its workout value and indoor riding, others have differing opinions on noise level and resistance.
AI-generated from the text of customer reviews
Disclaimer: By clicking “BUY NOW,” you will be redirected to Amazon’s website to complete your purchase.
All transactions and order details will be handled by Amazon. You will receive a small discount at checkout.
Misfed Original –
Excellent product for the money! Recommended!
I was somewhat reluctant to purchase this based on some of the product reviews, but I rolled the dice and was NOT disappointed! Let me refute some claims in other reviews:(A) It is VERY easy to assemble. There is ONE bolt to install the resistance wheel to the trainer frame. The instructions are pictorial only, but every screw, washer, bolt, and tool (included) are labelled. If you can follow “align bolt A with washer B into hole C and tighten with bolt D”, you’ll be fine. Its not rocket science. After attaching the resistance wheel to the trainer frame, be sure to align the tightening screw (with the big nob) into the bolt on the resistance wheel. Again, its not rocket science.(B) Attaching your bike to the trainer frame might be a little awkward the first time, especially if you are doing it by yourself, but its not difficult. After you get it right, removing the bike and reattaching it is easy. With some bikes, you may have to replace the axle pin (included), but I did not have to do that. My 25 year old mountain bike attached fine the first time. RECOMMENDATION: Do not rush this step or you may find your bike slipping out of the trainer frame and you flying across room on your moving bike!.(C) A front wheel stabilizer IS included. Once my bike (with 26″ mountain bike tires) was attached in the trainer frame, the front wheel sat 3″ above the ground and the real wheel sat about 2″ above the ground. I am using this in my basement with 7′ ceilings and still have headroom when I ride.(D) Noise. Its not silent, but I would not describe it as “noisy” either. I would compare the noise to that of a someone using a vacuum cleaner on the floor above you. Its more of a “drone” or a “whir”. Pitch varies with speed and – for me – at a low-moderate speed the noise definitely gets more pronounced, but is less so at low, moderate, and higher speeds. My trainer sits on a “commercial” type carpet that you’d find in an office building. To say one needs “noise-cancelling headphones to watch TV while riding” seems way out of whack with what I am experiencing.(E) An adjustment dial can be attached to your handlebars, nut it does not do much (I’ll agree with that!) but – once I set the base resistance using the nob at the back of the resistance wheel (while I am off the bike), I am able to use my front and rear derailleurs to adjust resistance somewhat (its not as pronounced as when you are riding on the road, though). You can then use adjustment dial to make small resistance adjustments within a gear (if that makes any sense). NOTE: I used 2 or 3 small Velcro straps to attach the adjustment cable to the frame. This is not necessary if you plan on using your bike in- and out-doors, or moving the bike between uses…but I plan on keeping it where it is until spring/summer, so the Velcro just keeps things tight and tidy.(F) The workout: Call me Captain Obvious, but the higher the resistance you set initially will determine how hard you work. I’m still playing with it to find the right setting. What feels “right” at first may be too tough to sustain. My first workout kicked my butt. You will likely find yourself making many small adjustments at first until you find your “sweet spot”BOTTOM LINE: Looking for a budget bike trainer, this is the one. There is nothing out there less expensive than this. Its sturdy AND it does the job. Are there better, quieter, more feature-rich units out there? Sure…but a 2 or 3 times the cost, or more! If you are looking to buy an inexpensive indoor bike trainer to help lose your COVID-15, this is definitely worth the investment, IMHO
Dawn Brooks –
Bike Trainer Stand
This is a great quality trainer bike stand at a super price.It was so easy to install after watching the video on the website. I have used it non stop since installing the stand. It is very sturdy and makes and makes riding enjoyable.D. brooks
Kindle Customer reesew –
Great trainer, excellent price
I haven’t ridden a bicycle in years, but when the doctor says you need to exercise more, I decided I would give bike riding a try. I had forgotten how good it feels to ride a bike outside! The problem is, this is winter in Central Alabama, and although we have some very nice days (today is one of them), I still wanted the option to be able to ride my bike when the weather was not good. So, when I saw this bike trainer with countless positive reviews, plus with an excellent price (mine was half off) I knew I couldn’t go wrong by purchasing it. Today I put it together. And it was very easy! All parts were included, and the pictorial directions were spot on. Even though I’ve already ridden outside today, I went ahead and set my bike up on the trainer and took it for a whirl. Setting my bike up on the trainer was very quick and easy. I’m 5’5″ and I was a little concerned that I might not be able to swing my leg over the increased height of the bike. However, no problems. The bike is very secure and stable in the trainer. I had no fears of falling off. So, I would highly recommend this trainer to anyone who would like to ride during bad weather, or just to have a setup indoors. I am very pleased with this product!
Greg Michael Nordstrom –
Robust and simple, the way a trainer should be
I bought this trainer 2 weeks ago, replacing a trainer I’d had 5 years ago. I have to say I didn’t think it possible to buy a mag trainer for less than $100 that would be good at all. I was shocked and skeptical at tis price point, but the other reviews made it worth a try, and $35 is hardly a lot to risk.The trainer came in 3 pieces — assembled frame, mag unit with resistance shifter, and thru axle. It was well packed but wish the mfgr would ship with cardboard stuffing instead of styrofoam (time to rid the world of this stuff). The rack was assembled and required only bolting on the mag unit, with a single bolt that was present in the mount and needed only be pulled out, inserted through the mag unit, then firmly bolted on. I have a Specialized brand bike that did require swapping thru axles with the one provided, a 2 minute job, as my bike’s thru axle did not fit well in the two axle mounts. Once done, the bike mounted easily in the axle mount. The axle mount retractors were easily adjusted, but there is a lock nut that needs to be slid outboard to rotate the mount screws (actually, nice, simple design).In use, I find that with modest pressure against the tire (adjustable with a screw on the mag unit, after assembly to the frame) I can ride with the resistance setting at 2 or 3, and my bike in 3+3 on the shifters. I get a good 35 minute workout at 136 BPM heart rate. The mag unit is not unusually noisy – the noise is mainly tire friction on the roller, not the mag unit internally. It is what one would expect, depending on tire type — mine being a road tire with not much tread. More aggressive treads will be louder as they produce more noise on the roller. I am able to ride with a small bluetooth speaker at modest volume without the mag unit making noise above it.The frame is sufficiently wide that I am stable laterally while riding, but does close easily when moving it (watch fingers!), but totally stable in riding position. A cross bar once the frame is open, to keep it so, might be a nice addition in a future model.Overall, very happy with this unit, it is every bit as good as my previous trainer that cost 4 or 5X this one. Hard to believe this level of quality for $35. I would recommend to anyone.
Samantha Kerbaje –
Lo compré hace un mes pero evitaba instalarlo porque me dejé influir por comentarios que leía sobre lo difícil que era armarlo y la verdad no tiene mucha ciencia.Todo vino en buen estado, ninguna pieza defectuosa. Si se nota que los materiales no son los de mejor calidad pero de nuevo, si cumple su función y tampoco es de cristal.Vino pre-armado, en realidad solo tuve que atornillar la rueda de resistencia a todo lo demás. Luego reemplazar el eje de la rueda trasera por un eje que trae el kit, para que pueda ser “enganchado” en los dos parales. Y eso es todo.Trae un aparato unido por un cable con 10 niveles de “resistencia” que se coloca en el manubrio, pero no le veo la utilidad ni siento que haya diferencia al moverlo de niveles.Si es ruidoso al utilizarlo, en una escala del 1 al 10, le pondría un 7 u 8 de ruido. Hasta el momento estoy conforme con la compra.
Ali –
When you put the bike on the trainer and start your workout the bike in moving
Joaquín Rocha –
Cumple perfectamente con lo deseado.
Rob –
I bought this Bike Trainer when it was on sale to use indoors with my first road bike I bought last year. First time I’ve ever used a Bike Trainer, but so far I’ve been quite impressed!Set up: fairly straightforward to set up. No English instructions, but the diagram was helpful and came with the needed tools. I did have to google how to replace my rear wheel bike skewer with the one included, but if you have a quick release tire, it’s actually quite easy. Lots of tutorials on YouTube.Usability: the design is intuitive so it’s easy to understand how everything works. It comes with a dial to clip onto your handlebar to increase or decrease up to 8 resistances for your rear tire. I’ve noticed it tends to get a bit noisy the further you tighten the roller into the rear tire, but I’ve be been leaving it a bit loose and it seems to work fine without much noise.Overall value: good product, sturdy, foldable when not in use, comes with a separate front piece to rest your front wheel on (usually sold separately). When on sale, it’s one of the cheapest options out there. So far very satisfied.
FURANO –
１台目負荷器が機能せず、負荷変更レバーを操作しても負荷は変わらずダイヤルを3-2-1-0と騒音が大きくなりうなり音を発します。交換した２台目も同様不具合。問い合わせると同種の不具合が多発しているようで交換してもらえず返金処置になりました。まだ販売しているようですが今出荷されているロットの製品は不良品の様です。負荷器以外は充分な強度があり良い品でした。一万件以上の販売実績があり評価も高いのに残念です。